Aluminum Finish Card Laminated Steel Plate Heavy Roughness Value ID Card Lamination Plate

Aluminum Finish Card Laminated Steel Plate Heavy Roughness Value ID Card Lamination Plate

1. Introduction of Aluminum Finish Card Laminated Steel Plate Heavy Roughness Value ID Card Lamination Plate

Aluminum Finish Card Laminated Steel Plate Heavy Roughness Value ID Card Lamination have aluminum finish surfaces on both sides and are designed for laminating plastic card sheets in the card laminator. It can ensure perfect plastic card surface finish after lamination.   

2. Key Features of Aluminum Finish Card Laminated Steel Plate Heavy Roughness Value ID Card Lamination Plate

1). The two sides are covered with protection foils (blue thin films) to ensure good protection on both surfaces. There is no glue left after the foil is removed before the plate is used at the first time.

2). There are no scratches, dents, stripes shadows and dust on plate surfaces.

3). The edges are smooth and deburred with the round curved corners.

4). Two sides are made matte in the same quality.

5). After lamination, the plates are not sticking to the laminated plastic sheets.

3. Parrameters for Aluminum Finish Card Laminated Steel Plate Heavy Roughness Value ID Card Lamination Plate

Plate size(L×W): A4, A3 or custom-made size

Plate thickness: 1.0mm or customized (Thickness tolerance: ±0.05mm)

Dimension tolerance: ±1mm for length and width.

Plate flatness level: maximum 1 mm glossy plate surface glossiness: over 800 GU at 20° (both sides)

Surface hardness: HRC26±2

Roughness Value: around 2.1RA to 5.5RA

Thermal transmission: 0.04cal/℃.cm.sec at 20℃

Packaging box: solid plywood carton with soft cushion protection inside.

Some lamination effect as below:

https://www.allforcards.cn/a3-08mm-matte-finish-card-laminated-steel-plate-for-pvc-card-lamination-p5348472.html

https://www.allforcards.cn/a4-glossy-finish-card-laminated-steel-plate-06mm-for-bank-card-lamination-p5348534.html