A3 0.8mm Matte Finish Card Laminated Steel Plate For PVC Card Lamination

A3 0.8mm Matte Finish Card Laminated Steel Plate For PVC Card Lamination

1. Features for A3 0.8mm Matte Finish Card Laminated Steel Plate For PVC Card Lamination

Slight Matte Finish Card Lamination Steel Plate MSP-M have matte finish surfaces on both sides and are designed for laminating plastic card sheets in the cad laminator. It can ensure perfect plastic card surface finish after lamination.   

Key Features: 

1). The two sides are covered with protection foils (blue thin films) to ensure good protection on both surfaces. There is no glue left after the foil is removed before the plate is used at the first time.

2). There are no scratches, dents, stripes shadows and dust on plate surfaces.

3). The edges are smooth and deburred with the round curved corners.

4). Two sides are made matte in the same quality.

5). After lamination, the plates are not sticking to the laminated plastic sheets.

2. More detials for A3 0.8mm Matte Finish Card Laminated Steel Plate For PVC Card Lamination

Plate size(L×W): A4, A3 or custom-made size

Plate thickness: 0.6mm, 0.8mm (Thickness tolerance: ±0.05mm)

Dimension tolerance: ±1mm for length and width.

Plate flatness level: maximum 1 mm

Surface roughness value range: 0.3-1.5um

Slight Matte plate (Ra0.3μm-0.5um)

Heavy Matte plate (Ra1.3-1.5um)

Glossy plate surface glossiness: over 800 GU at 20° (both sides)

Surface hardness: HRC80±20

Thermal transmission: 0.04cal/℃.cm.sec at 20℃

Packaging box: solid plywood carton with soft cushion protection inside.

Packing:Wood Tree Texture Double Side Laminating Steel Plate for Card Making / Stainless Steel Plate Press on Cards in standard export wooden case

Some lamination effect as below:

https://www.allforcards.cn/A4-Glossy-Finish-Card-Laminated-Steel-Plate-06mm-For-Bank-Card-Lamination-p5348534.html